Several types of cranes are used in civil engineering. A crane is a piece of heavy machinery that is a tower or platform with ropes and pulleys. Used for lifting and lowering materials. The most common use of cranes is in construction and heavy machinery. Cranes for hire Perth is best lifting services for industrial, residential, commercial, government, and semi-government organizations.
1. Vehicle Mounted Crane
Cranes are only needed as temporary structures during construction. That is, it is attached to the cars for quick movement. Most cranes are mounted on trucks with the exception of a few heavy cranes. The wheels of the cranes attached to the car are rubber. These cars with wheels can move faster than trucks, but they cannot be reached on uneven surfaces. The booms are attached to the base of the car to ensure the stability of the crane during work.
2. Tower Crane
Tower cranes are widely used for the construction of tall buildings because they can operate up to 265 feet and also as short as 230 feet. It has a load capacity of approximately 20 tons and was laid on the ground during construction. These cranes are fixed with a solid concrete base and anchored with large screws that can be easily removed after installation. Tower crane
3. Rough Terrain Crane
An all-terrain crane is a special type of crane mounted on red. This crane is for use in off-road construction or in uneven terrain where a conventional truck crane is not suitable. This crane uses specially designed rubber wheels and booms are attached to the base of the platform to ensure stability at work. Rough terrain crane
4. Crawler crane
It is a mobile crane, but the movement of the car is ensured by belts, because they do not need support for the stability. Their carrying capacity is very high (40 tons to 3500 tons). Thanks to the belt system, it can move anywhere, even on soft terrain. It is able to travel by cargo and is used to transport heavy loads on construction sites. Crawler crane
5. All terrain crane
It is also a mobile crane that can work on paved roads and on uneven terrain at the same speed. They have more wheels than a regular car and balance the car without turning in difficult areas. So we can use this crane instead of the same cargo crane and dual-purpose heavy-duty crane. All Terrain Crane
6. Railroad Crane
Rail cranes are used for railway construction, repair and maintenance of railways. Below it has flanged wheels that can only be moved along the rail. Railway crane
7. Telescopic Handler Crane
Telescopic cranes are used to handle pallets of bricks, to install steel truss beams and the like. They also have booms at the base. The crane part is rotatable through 360o. Telescopic handling crane
8. Harbor Cranes
Port cranes for loading and unloading ships are available in port areas. Port crane
9. Floating crane
Floating cranes are needed for the construction of bridges, construction of ports. It is also used for loading and unloading ships. They have a capacity of up to 9000 tons. Therefore, it is also useful in getting sunken ships out of the water. Drifting crane
10. Aerial Crane
It is also called an air crane. It resembles a helicopter and is used when it is difficult to reach the target across the ground. Ropes are used to lift material.
11. Telescopic crane
The telescopic crane has a large boom where the number of tubes is set one in the other. These pipes are pushed outwards by a hydraulic mechanism. It is used to build signal towers, rescue operations, towing ships out of the water and so on. Telescopic crane
12. Level Luffing Cranes The level break crane has a tilting jib that moves up and down and allows the crane arm to move in and out. Ships use it to place containers or unload ships.
