The process of coming to terms with the death of a loved one is never easy. As a result, one way for some people to cope with losing a loved one is to retain a physical reminder of that person nearby. This is a reminder that even if they are not physically there anymore, their memory and spirit will continue even after they have passed away. Keeping a deceased loved one’s cremains with you can be made possible by wearing an urn necklace after their passing. At the same time, the owl urn and the ladybug urn are the ones that sell the most and are the most popular among urn necklaces.

What is an urn necklace?

This option, also known as ash jewelry or memorial jewelry, allows you to carry a little portion of the cremains of a loved one with you at all times. This choice serves as a means to maintain your loved one’s memories, life story, and spirit near you.

Cremation jewelry is designed to carry the cremains of a deceased loved one. Still, it also can hold other little mementos of the dead, such as a lock of hair and dried flowers from the funeral ceremony or other tokens of remembrance. It most frequently takes the form of customized jewelry that may be worn and is appropriate for cremation. People often choose to memorialize their loved ones with cremation jewelry in the form of a necklace, which is worn around the neck; a bracelet, which is worn around the wrist; cremation rings, which are worn around the finger; or earrings, which are worn in the ear; or keychains, which are carried on the keychain. An urn necklace such as the owl urn and the ladybug urn is the best option for the remembrance of your loved ones.

People who have lost a loved one may decide to either deposit the cremains of their loved one in an urn and bring them home to display on a mantel, or they may opt to scatter the ashes of their loved one in a particular location that they will be able to return to on an annual basis. Suppose the deceased was someone who was cherished by many different communities of people. In that case, the family might decide to deposit the cremains in an urn of a smaller size and store it in a columbarium or mausoleum rather than a traditional cemetery plot.

How Does Cremation Jewelry Hold The Ashes?

Regardless of the kind of cremation jewelry you decide to buy, you can be assured that it will be fashioned by hand and that it will have a thin passageway that is hollow running through the middle of the piece. The inside chamber is tucked away inconspicuously, and the entry point is flush with either the top or bottom of the jewelry item. The ashes of your deceased loved one will be placed into this internal cavity, and then the opening will be sealed so that the ashes are contained within.

Access to the inside cavity of the piece of jewelry can be gained by a threaded bail, a threaded stopper, or a threaded screw respectively. The sculpture’s interior may be accessed by screwing and unscrewing these components, which offer access to the space within the piece. The cremated ashes are inserted into the inner cavity using a tiny funnel, and after they are in place, the bail, stopper, or screw is used to close off the hole and keep the remains contained.

How to fill an urn necklace?

Before you fill cremation jewelry

Determine how the stones in your jewelry are set. Each item has one of these three patterns:

Jewelry urn with a bottom loading and a twist-off cap jewelry urn
With a bottom loading and a little screw to shut it
Jewelry urn with a spring-loaded lid that is secured with a screw on the rear

The jewelry urns with a little screw to seal the container for the ashes are the topic of the step-by-step video we have. Decide on whether or not you want the jewelry urn to be permanently sealed before you start.

Choose a space in your house that:

Has a level, flat surface.
is properly aired
a windless place
a place with adequate illumination

Supplies required to fill your jewelry urn

Get the suggested things mentioned below and arrange them.

a little towel
toothpick*, a little funnel*, and a scrap of clean paper to fit the chamber urn
tiny sieve (optional – to sift clumps from fine ashes)
Liquid glue or adhesive (check with your vendor – OneWorld Memorials includes cement with each piece)
little plastic spoon clothespin, small flathead screwdriver (to aid in propping up the bottom or side-loaded cremation pendants)

Follow these straightforward steps to load your jewelry urn.

Note that the instructions are based on a screw cap, not a twist-off one.

Place the thin towel on the spacious desk. This guarantees that all urn components are readily accessible and visible.
Place the tools, materials, and ash container on the towel.
Place the sheet of paper atop the towel. Place a little amount of cremains on the piece of paper. Use the spoon to separate big chunks of ash from fine ash, if any are present. (You may also use the little sieve to remove bigger particles from fine ashes.) The paper will also capture stray ashes when the urn is being filled.
Locate the screw cap on the jewelry and use a tiny screwdriver to access the ash chamber (usually a flathead). Take care to avoid scratching the jewelry.
Using the plastic spoon, collect a little amount of the paper’s fine ashes.
Use a clothespin to hold the jewelry upright with the opening at the top if it does not lay flat. (Or, try asking a family member or close friend for assistance.) Insert the little funnel into the aperture of the compartment.
Pour a tiny amount of ashes into the funnel from the spoon. Shake the ashes gently through the funnel. Use the toothpick, if necessary, to carefully push ashes down the funnel. Make sure not to overfill the chamber. It must be possible to replace the screw without disturbing the ashes.
Use the toothpick to clean the threads of any cremains. The cap should be reversible without impediment.
If you desire to seal the urn permanently, apply the liquid glue. At this point, you will screw the urn’s lid shut. Close the screw to approximately 80%. Then, using the toothpick, apply a dot of the adhesive under the screw head; swiftly tighten the screw to 100 percent before the glue dries. Allow the glue to cure for 24 hours.
Note: If your jewelry includes a twist-off top, ensure that the cap is flush and aligned with the flat side of the item when worn. (see video)

Wipe your urn necklace or cremation bracelet with a delicate cotton towel to remove fingerprints or stray ashes. It is advised not to immerse jewelry in water.

Where to customize an urn necklace?

The majority of these specialist pieces of jewelry have the appearance of regular necklaces; nevertheless, they contain a tiny chamber that keeps the cremains secure and prevents them from being disturbed. This chamber, often known as the necklace urn, can be permanently shut so that you can have peace of mind. Fewer readings

Ashes are often distributed to family members and loved ones using necklace ash, which has recently been a popular option. It is a protected and meaningful method to preserve the remembrance of the departed person near at hand and in your heart at all times. Because of the potential risk of damage to the necklace, we do not advise that you wear it to bed, shower, or engage in physically taxing activities while you have it on. You can have your desired urn necklace at YFN.

With all the best features and quality, we present the Top 20 popular urn necklaces to hold a loved one’s ashes.